Skip to main content

Stub alignment (stubs print too high)

The check at the top is fine. The middle stub is about one line too high and the bottom stub is about two lines too high.

Step 1: Print at 100%​

In the printer properties:

  • Do not use Fit to paper.
  • Do not use a border. Use borderless if the printer has that choice.
  • Do not use Auto Scale. Use 100%, actual size, or real size.

Step 2: Adjust the margin in QuickBooks​

ezCheckPrinting places the stubs where QuickBooks tells it to.

  1. QuickBooks: File > Printer Setup > Checks > Align. Change the vertical adjustment.
  2. To check, print the QuickBooks check data onto blank stock with a real printer, not the virtual printer.
  3. When that real-printer copy has no alignment problem, print again with the virtual printer.

MICR line position​

Settings > Check Setup. Change Offset left, Offset right, Offset up, or Offset down. The default is 0. To print lower, raise Offset down. Try 0.5 first, then increase it if the line is still too high.

Half a page prints​

The usual cause is the wrong paper size. Use Letter. Fit-to-page and scaling settings can cause the same issue.